Products

Novodur HD 15

Novodur® HD 15 is an easily processable ABS grade with well-balanced mechanical properties and an exellent chemical and stress cracking resistance

Key Features

  • HD service package
  • Sterlizable

Applications

  • Medical appliances
  • Inhalor housings
  • Insuline pens

Industries

  • Grade Version
  • Properties

    Properties of Novodur HD 15

    Property, Test Condition Standard Unit Values
    Rheological Properties
    Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 15
    Mechanical Properties
    Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 16
    Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 6
    Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 14
    Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 6
    Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 170
    Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 90
    Tensile Stress at Yield, 23 °C ISO 527 MPa 48
    Tensile Strain at Yield, 23 °C ISO 527 % 2.5
    Tensile Modulus ISO 527 MPa 2300
    Nominal Strain at Break, 23 °C ISO 527 % 10
    Hardness, Ball Indentation ISO 2039-1 MPa 102
    Thermal Properties
    Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 102
    Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 100
    Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 93
    Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 99
    Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 90
    Thermal Conductivity DIN 52612-1 W/(m K) 0.17
    Electrical Properties
    Dissipation Factor (100 Hz) IEC 62631-2-1 10-4 48
    Dissipation Factor (1 MHz) IEC 62631-2-1 10-4 79
    Dielectric Strength, Short Time, 1.5 mm IEC 60243-1 kV/mm 37
    Relative Permittivity (100 Hz) IEC 62631-2-1 - 2.9
    Relative Permittivity (1 MHz) IEC 62631-2-1 - 2.8
    Volume Resistivity IEC 62631-3-1 Ω*m 1013
    Surface Resistivity IEC 62631-3-1 Ω 1013
    Comparative Tracking Index IEC 60112 V 600
    Other Properties
    Density ISO 1183 kg/m³ 1050
    Water Absorption, Saturated at 23 °C ISO 62 % 1
    Moisture Absorption, Equilibrium 23 °C/50% RH ISO 62 % 0.22
    Processing
    Linear Mold Shrinkage ISO 294-4 % 0.4 - 0.7
    Melt Temperature Range ISO 294 °C 230 - 260
    Mold Temperature Range ISO 294 °C 60 - 80
    Drying Temperature - °C 80
    Drying Time - h 2 - 4

    Typical values for uncolored products

  • Processing

    Processing of Novodur HD 15

  • Safety Data Sheet